At Work At Home On the Road

Lockout/Tagout Checklist

  • ​Employees who work with hazardous energy must be trained in energy control procedures, also known as Lockout/Tagout. Measures must be taken to disable machinery to prevent the release of hazardous energy during maintenance procedures.

    National Safety Council provides the following checklist to be used in conjunction with training employees on Lockout/Tagout procedures:

     

    • Is all machinery or equipment capable of movement required to be de-energized or disengaged and blocked or locked out during cleaning, servicing, adjusting or setting up operations?
    • If the power disconnect for equipment does not also disconnect the electrical control circuit, are the appropriate electrical enclosures identified and is a means provided to ensure the control circuit can also be disconnected and locked out?
    • Is the locking out of control circuits, instead of locking out main power disconnects, prohibited?
    • Are all equipment control valve handles provided with a means for locking out?
    • Does the lockout procedure require that stored energy (mechanical, hydraulic, air, etc.) be released or blocked before equipment is locked out for repairs?
    • Are appropriate employees provided with individually keyed personal safety locks?
    • Are employees required to keep personal control of their key(s) while they have safety locks in use?
    • Is it required that only the employee exposed to the hazard can place or remove the safety lock?
    • Is it required that employees check the safety of the lockout by attempting a startup after making sure no one is exposed?
    • Are employees instructed to always push the control circuit stop button prior to reenergizing the main power switch?
    • Is there a means provided to identify any or all employees who are working on locked-out equipment by their locks or accompanying tags?
    • Are a sufficient number of incident prevention signs or tags and safety padlocks provided for any reasonably forseeable repair emergency?
    • When machine operations, configuration or size require an operator to leave the control station and part of the machine could move if accidentally activated, is the part required to be separately locked out or blocked?
    • If equipment or lines cannot be shut down, locked out and tagged, is a safe job procedure established and rigidly followed?
  • Want Free Safety Measurement Tools?

    When you sign up for the Journey to Safety Excellence, you gain access to online tools, including a Safety System Assessment that is helpful in pinpointing specific safety improvements needed.

    Join the Journey

National Safety Council Mission

The National Safety Council eliminates preventable deaths at work, in homes and communities, and on the road through leadership, research, education and advocacy.

Sign Up for Newsletter

© National Safety Council. All rights reserved.